Saturday, November 7, 2009

Colloidal / Ionic Silver constant current - Part 2

Part 2

This is the AC version parts:

AC version soldered.

AC version put in a cottage cheese container. Notice that it puts out a max of about 39 volts with no load.

Here I started with a very clean jar and some 99.99% pure silver Canadian maple leaf coins.
Well, I did some experiments with just the AC constant current and decided I didn't like it. It didn't seem very efficient even after running all night. I decided to add a full wave bridge to the circuit to make it a DC output. At that point it was running at 0.5 mA.
This worked much better. It starts with a higher voltage and maintains a constant current. As the silver ions go into the distilled water, the resistance drops. This means the voltage has to drop just to maintain constant current. On one batch it started at about 9 volts and on a different brand of distilled water it started at 28 volts. That means the second batch's water was way more pure, even though they are both distilled.

Here is a pic showing the new DC version running for a bit.

This shows the oxide layer forming on the negative coin.

I had to take it out and wipe it off about once every hour or two. It seemed to take a little less than 1 hour for every ounce of distilled water. About 45 minutes per ounce. A small 4 ounce glass would take about 3 hours and a big 16 ounce mason jar takes about 12 hours. But, you will want to stir it every so often. I just stirred it when I cleaned the oxide off the coin.

I would "cook" it until the voltage output dropped to about 3 to 4 volts. The water would still be perfectly clear. But after a few days it would turn a amber color. I also would filter mine through a non-bleached coffee filter.

Here is a batch after sitting a few days. The jar was wrapped in aluminum foil to keep the light out. (Since this batch and switching to 45 minutes per ounce at 0.5mA, the water stays clear indefinitely. ) This picture shows what happens when cooking for 7 hours when it should have been about 3 or 4 hours. Although it did take a few days to turn amber.

That is a laser being shown though the liquid. This effect is the tyndall effect and it works even when the water is still clear. If you try it with just distilled water you will not see the laser path at all. So this is a good way to test as you are getting close to being done. And you can see something is happening because the voltage is steadily moving down.

Remember that the higher the voltage starts at, then the more pure the water. But if you take the same water and use different sized pieces of silver like silver wire instead of coins, then the voltage will change as well. So, if you are consistent, you can compare different water qualities.

I found that drinking it doesn't seem to help as much as gargling it and swishing it around in your mouth. Once it gets in your stomach, the ions interact with the stomach acid and form silver chlorides. The suspended colloids (about 15% of the solution) will go into your bloodstream. But gargling it gives you a much better absorption. You will need to gargle for 2 to 3 minutes and 3 times a day if you are sick.

Another great way is nasal spray. You can get a dark glass bottle and nasal spray top at most health food stores.

The other way, probably the best, is to use a nebulizer (ultrasonic). I haven't tried this though.
Let me know if you try this and what your experiences are.


<------------ Back to Part 1